- Portiers vidéo
- Pièces détachées
- Contrôle d'accès
26 décembre 2012
As you know for our Skyline panel a huge variety of modules can be interconnected in order to create your customized panel.
The target of this article is to solve the doubts that you can face when the disposition of the modules is different of the standard one.
All the Skyline modules include in its box the necessary cables (12 cm length) to connect them to the previous modules in the standard arrangement (Normally with the module immediately under the amplifier), but if it is required a special configuration, for example with the module further located from amplifier, because other modules are fitted between them, or because they are located in different frames (A panel with several casings because there is no series with size enough to allocate all the requested modules for that access).
In the above mentioned cases you have to order the equivalent cable (with the same number of vias) but in a longer format, 70 cm instead of the regular 12 cm. See below a table with the references of the different type of cables involved.
In this way the proper length will allow the correct connection of the modules independently of their position.
See below a table with the classification of existing cables applied to the different systems and type of modules.
You can find in the table as well a picture showing the connectors to which the cable has to be fitted.
Find below a link with the above tables in excel format:
We hope that you find useful and that you can take advantage of the present information in order to quote the necessary cables for your next Skyline panels.