CORA PANEL INDUCTIVE LOOP

The inductive loop allows the audio signal to be transformed into a magnetic field adapted to the hearing aids or prostheses of people with hearing disabilities.

The inductive loop for the CORA panel consists of: expander module and inductive loop itself.

• The DUOX PLUS Expander panel module is fixed inside the flush-mounted box using a double-sided adhesive strip on the base, leaving the module inside the flush-mounted box. It is not possible to mount it in the surface box because it is not deep enough to accommodate it.
• The DDA inductive loop is fixed by means of clamps that are glued to the back cover of the Cora panel and that are included in the loop.

The DDA Inductive Loop is only enabled when the panel Cora is active and the screen is on.

The expander is connected to the  CORA panel through the CN4 connector.

When installing the DDA inductive loop using the DUOX PLUS Expander panel, an external 12Vdc source must be used. In this case, it will also be necessary to connect the ground of said source to the ground of the Expander.

 

The expander has the following connections:

• CN1: DDA inductive loop connection.
• CN2 and CN3: Directory panel connection.
• CN4: Connection of the expander to the CORA panel.
• RS-485: RS-485 bus connection