Basic functions. Activates an additional function from F1 or F2 of the DUOX PLUS terminals, without additional wiring. The relay can also be activated by a call or by activation of the door release. It can be connected to any point on the bus.
This relay allows the most basic and common functions to be carried out: opening a door, activating a light, etc.
For more advanced functions not available in this relay, FERMAX has the DUOX PLUS relay ref. 3267.
Programming is very simple, even if the factory default parameters are already the ones desired by the installer, you will not even have to program anything. Just connect and that's it.
Using jumper JP1, the relay can be programmed as:
JP1: Work mode selector
• GE: GENERAL ENTRANCE mode
• BL: BLOCK mode
• +12: 12 Vdc auxiliary output (max: 300 mA).
• C, No, NC: Potential-free relay contacts. 250 Vac / 30 Vdc - 3A. Max.
• ON: LED (Green) indicating that the relay has been activated.
BUS INPUT: Connection strip to the DUOX PLUS Bus.
PRG BUTTON : To enter PROGRAMMING mode and define the ACTIVATION TIME.
EXTERNAL PUSH BUTTON CONNECTIONS: By shorting BS and -, the relay will activate for the configured ON TIME.
• PWR (Red): Indicates that the device receives the necessary power to work.
• MODE (Blue): Indicates if the device is in PROGRAMMING mode and the stage of the procedure it is in.
QR TO THE USER GUIDE : when scanning this QR with the mobile, it takes the installer to the technical manual of the product.
Power supply: 18-24 Vdc
|GENERAL / BLOCK ENTRANCE||with jumper JP1 (GE / BL)||BL (with JP1)|
|ACTIVATION COMMAND||Lock release, F1, F2, Call from panel or guard unit||F1|
|ACTIVATION TIME (Tact)||0-99 s.||4 s.|
NOTE: if the factory default parameters are already those desired by the installer, you will not have to program anything. Connect and go.
Measures of the product: 86 x 106 x 31 mm
Peso: 0.159 kg
Measures of the packed product: 6,5x11,3x9,6 cm
EAN 13: 8424299032337