1 ACCESS MDS DIGITAL CENTRAL UNIT

REF: 2405
Manages the installation in the MDS Digital system (Capacity per CU: 9999 apartments, 32 accesses/guard units. Can be linked up to 63 CUs). Can be either general inputs or indoor block. Includes PC software for configuration and administration
See more

4 PANELS MDS DECODER

REF: 2436
Up to 4 4+N Audio Panels with 1 or 2 pushbuttons, each output is programmed with a 3-digit MDS address that identifies each panel. Conversation privacy. DIN10
See more

4/W MDS AUDIO DECODER

REF: 2424
Up to 4 apartments (4 outlets). Channels audio between an outdoor panel and the apartment. Each output is programmed with a 4-digit MDS address that identifies the apartment terminal connected to each output. Conversation privacy. DIN10
See more

4/W MDS VIDEO DISTRIBUTOR

REF: 2418
MDS. 4 outputs. Recommended for video signal branching. DIN10 or wall mounting.
See more

8 MDS/AC+ RELAY DECODER

REF: 2430
It has 8 relay outputs, which can be configured as bistable (relay switching on each activation) or as timed (closing each relay for a time ranging from 1 to 255 seconds). DIN10.
See more

8 MDS/AC+ SENSOR DECODER

REF: 2429
8 configurable sensor inputs: N.O. (normally open) or N.C. (normally closed). The signal can be sent in real time (instantaneous) or delayed (configurable time that the sensor has to be activated to generate an alarm signal)
See more

8/W MDS VIDEO DISTRIBUTOR

REF: 2419
MDS. 8 outputs. Recommended for video signal branching. DIN10 or wall mounting.
See more

BATTERY ADAPTOR 12 V

REF: 2060
For when emergency operation is required, in case of power failure. 12VDC power supply and any standard lead acid battery (not included). 12VDC input and output. DIN6.
See more

CABLE FOR AUDIO DATA POWER (100M ROLLS)

REF: 5918
Cable hose for installation of MDS systems. (4 1 mm2 wires + 1 shielded twisted 2 x 0.5 mm2 pair). Roll of 100 m.
See more

CABLE FOR VIDEO+POWER (100M ROLLS)

REF: 5919
Multicore cable for installation of VDS or Video for MDS systems. (3 1 mm2 wires + 75 Ohm coaxial). Roll of 100 m.
See more

MC740 G2 MAGNETIC CONTACT

REF: 1076
Magnetic surface contact for door open/closed signalling or warning
See more

MDS DIRECT/CITY 1 ACCESS SWITCHER

REF: 2443
One is required for each additional MDS Direct/City video panel.
See more

MDS DIGITAL 2 ACCESSES SHIFTER

REF: 2379
It is necessary to connect more than one audio/video or guard unit panel to the Central Unit. Switcher for connection of 2 audio/video accesses (outdoor panels or guard units)
See more

MDS DIGITAL DESKTOP GUARD UNIT

REF: 2537
Table stand included. Surface installation. It includes a 4" graphic display that reports all events and actions within the installation: call origin, type of call, call waiting, last call, etc.
See more

MDS DIRECT CITYMAX GUARD UNIT

REF: 2532
Table stand included. Surface installation. 4" graphic display reports all events and actions within the installation. The MDS Direct/City system allows a single Guard Unit to be connected throughout the facility.
See more

MDS REPEATER

REF: 2339
To regenerate the digital signal from the MDS bus of panels or decoders which is transmitted via the twisted pair of the installation. DIN10 rail.
See more

MDS-FIBER OPTICS CONVERTER

REF: 1345
For the transmission of MDS signals (audio, video and data) via fibre optic cable (single-mode fibre with FC/PC connectors). Includes Tx, Rx and feeders
See more

MDS/AC+ REMOTE MANAGEMENT TERMINAL

REF: 1087
Allows connection between the PC and the installation via the Ethernet network and the internet, thus allowing remote configuration, control and management of the installations, avoiding additional wiring.
See more

P.S.U. DIN6 100-240VAC/12VDC-2A

REF: 4813
Power supply for MDS installations or for activation of 12VDC electric strikes. Primary 100-240Vac / Secondary 12VDC and 2A. DIN6 rail mounting.
See more

PC DECODER PROGRAMMING MODULE

REF: 2466
For local connection between PC (serial port) and the installation, thus enabling configuration, control and management of the installation, for maintenance of installations where the PC is not permanently connected, as an installer's tool
See more

PROXIMITY CARD W/O MAGNETIC STRIP EM

REF: 23361
User identification device (via proximity). Includes screen-printed logo and card code.
See more

USB ADAPTOR TO RS485

REF: 24661
For local connection between a PC (via a USB port) and the system, thus enabling configuration, control and management of the system, for maintenance of systems without a permanently connected PC, as an installer's tool
See more

VDS/MDS DECODER

REF: 2409
Allows you to connect the General Inputs (MDS) with the Interior Blocks (VDS). One decoder is required for each VDS Inner Block. Add a video distributor (ref. 2448) and/or switcher (ref. 2450) in General Video Input installations.
See more
Available items have not been found.