Reference: 9443
Provides lift control to DUOX PLUS. Visitors can access only the floor corresponding to the flat that has opened the door. Interface between DUOX PLUS and MDS. The MDS Central Unit manages the lift control, by means of MDS relay decoders
The DUOX PLUS Lift Control Unit is a module used to provide lift control service to the DUOX PLUS installation, i.e. visitors can only access the floor corresponding to the home that has opened the door. It is an interface between DUOX PLUS and MDS, the MDS Central Unit being in charge of the lift control functionality, together with the relay decoders.
It is connected to the DUOX PLUS bus, the MDS Panel bus and the MDS Decoder bus.
- The lift control functionality must be programmed in the Central Unit
MDS, with the WINCOM+ software. Available at www.fermax.com in ONLINE SUPPORT/
SOFTWARE together with the manuals.
- One lift control module ref. 9443 and one MDS control unit ref. 2405 are required for each DUOX PLUS block.
- The DUOX PLUS general entrance panels are considered MDS panels with address 10, regardless of whether there is more than one. The rest of the MDS addresses [11...31] are reserved for MDS equipment: panels, access control readers or door controllers.
System: DUOX PLUS (2 wires digital)
El montaje puede realizarse tanto por fi jación atornillada, como por instalación en carril DIN. Dimensiones: 86 (H) x 89 (V) x 26 (P) mm. // 3,38 (H) x 3,50 (V) x 1,02 (P) pulgadas. - Tensión alimentación: 18 - 24 Vdc (se obtiene del bus DUOX); 12 Vdc (utiliza alimentación de MDS) - Consumo en reposo: 0,5 W - Consumo máximo: 0,54 W - Temperatura de funcionamiento: -5 ºC a +40 ºC // 23 ºF a 104 ºF - Humedad: 90% sin condensación
Technology: DUOX
Peso: 0.152 kg
Measures of the packed product: 6,5x11,3x9,6 cm
EAN 13: 8424299094434
Technical datasheet
Documentation